Recently I got together with a great musician and friend of mine Arin (The Construct) and decided to play around with ML raw and my recently acquired KomputerBay 128gb 1050x card. Here’s what came of it:
Canon 5D mkIII
Zeiss T*Planar 50mm f1.4
Zeiss Jena Flektagon 35mm f2.4 MC
SmallHD DP4 EVF
– Col B.
After hunting around on the net and various sources for a simple guide on how to get your DSLR or whatever footage into the 2:35:1 Anamorphic format I have decided to write my own. This method will allow you to export to Vimeo and Youtube without the black bars showing when the video is embedded.
1. Firstly download this PSD file from the following link – https://www.dropbox.com/s/9twrgw4zyr7r50p/CBC235Template.psd
2. The above will be your template/guide for aligning your footage in the timeline. Import the above template into Premiere (if using FCP convert this to a PNG and go from there) and place in your timeline above all video tracks so that it sits on top. Note below that the 2:35:1 marks are not yet turned on, as shown in the program monitor.
3. Once inserted into the timeline, make the template visible and lock it from being editable as shown below. You will now have black bars top and bottom of your program monitor. Now import and edit your footage as required:
4. Once editing you might find that you aren’t happy with where the shot lies e.g. the actor’s eye-line is cutoff or an important piece of scene information is missing due to the 2:35:1 crop area. This is now the time to reposition the image to highlight what you want seen. This is one of the great advantages of 2:35:1, you can force the viewer to look at a desired focal point.
Select each individual clip and then select Motion from the effects menu and change the relevant position numbers of the clip. The number you are wanting to effect should default to 540 in a 1080p clip. Simply decrease the number to move the video up and increase to move down. Bare in mind that moving it too far will increase the area of black space at the top or bottom of the screen beyond that of the 2:35:1 framing.
5. Now your ready to export your video. Follow the usual path File – Export – Media. Here you want to setup the export settings. I recommend the following, and it must be done in this order or else the Output resolution will continue to reset to 1920×1080.
Settings (as above and below):
- Select custom H.264 as video format
- Select level from the Basic Video Settings. As a standard it can remain on 4.2 but if your dealing with RED/Arri/BMCC footage you will want use the 5.1 level as it allows for a larger bitrate encoding.
- Select High from the profile list. The default is main, but high will encode the file with less compression.
- Change Pixel Aspect Ratio to Square Pixels.
- Choose your appropriate frame rate.
- Change the resolution to 1920×816, this will change the output size of the video to meet the 2:35:1 size.
- Use VBR 2 Pass for bitrate at the bottom of the Basic Video Settings panel
- For DSLR use a bitrate of 16mps (higher than recommended, but retains more detail)
6. The final step is the cropping of the video to make sure it meets the required output. While you have already set the output size (1920×816), you will now need to set the crop. Crop your source at the top (132) and bottom (131) to remove the black lines and enable your video to embed in widescreen, rather than with the annoying black bars.
Once the crop has been done and the output view looks to only show the cropped video, then you may export.
So why go through all the effort? Simple if you export a file setup to be 2:35:1 via the normal export route, you will find that it retains black bars, top and bottom even if embedded (as below). Some people don’t mind that, but I personally think it’s sloppy and really effects the embedded view of your videos.
By completing the steps above you will now have an embedded view that looks like this:
Simple, clean and ready for Vimeo and Youtube upload without those pesky black bars.
– Col B